○ 4x VGA camera's ○ 4,3 inch TFT scherm ○ Infrarood LED's ○ Met 15m rear camera Read more
€199,00
○ 4x VGA camera's ○ 4,3 inch TFT scherm ○ Infrarood LED's ○ Met 15m rear camera
The Motocam C4.3 4CH is basically a truck camera system and dashcam in one. The Motocam C4.3 has 4 cameras with infrared LEDs that capture almost everything around the truck. The Motocam C4.3 4CH has two cameras for the side near the blind spot, one for the front and one for the back with 15-metre cable. It gets its name from the beautiful 4.3-inch TFT screen.
This Motocam C4.3 4CH is actually a basic dashcam that can mainly be used as a camera system on the truck. The 4.3-inch TFT screen displays one camera at a time, the images from this camera are also stored on the SD card in the dashcam.
The Motocam C4.3 4CH is equipped with 4 VGA (640*480p) cameras with 9 infrared LEDs on each camera for night vision. The resolution of the cameras is sufficient to see and assess situations around the truck.
The cameras are waterproof and can therefore be mounted outdoors. The four cameras come with following cable lengths:
Cam 1 VGA 120˚: 3m (front)
Cam 2 VGA 120˚: 6m (left)
Cam 3 VGA 120˚: 6m (right)
Cam 4 VGA 120˚: 15m (rear)
Using the handy Bluetooth remote control supplied, the different cameras are switched between at the touch of a button. This allows the driver to make driving a lot more pleasant and safe.
As with any ‘standard’ dashcam, the Motocam C4.3 4CH truck dashcam has loop recording which automatically overwrites the oldest files for new files. That way, the dashcam always keeps on filming, even when the SD card is full. Depending on the size of the SD card, this preserves the last hours driven.
The Motocam C4.3 4CH truck dashcam automatically starts filming when the car is started and it stops automatically when it is switched off. So you don't actually have to look at it after installation. A prerequisite for automatic start and stop is that the cigarette power supply only provides power when the ignition is turned on, as this allows the dashcam to notice when the ignition is turned on and off.
With its built-in G-sensor, the Motocam C4.3 4CH notices when you have had an accident. Upon impact, images are automatically saved securely so they are no longer lost. They can no longer be overwritten or deleted via the dashcam. This way, you can be sure that the most important files are always preserved. The sensitivity of the G-sensor can be adjusted in the menu.
The Motocam C4.3 4CH has a built-in screensaver. This screensaver automatically turns off the screen - after 1 minute by default - so that the driver is not unduly disturbed while driving. The screen can be reactivated with a single press of the Bluetooth or OK button. The screen saver can also be switched off in the menu, in which case the screen always remains on.
This Motocam C4.3 4CH dashcam has a built-in microphone. The videos therefore feature audio. The microphone can be switched on and off with a single press of the Menu button.
Motocam C4.3 4CH comes with handy suction cup attachment for the LCD screen. This allows the screen to be mounted on the windscreen for good visibility.
The Motocam C4.3 4CH comes with 5V/3A cigarette power supply of 4 metres to power the dashcam. The power supply is suitable for 12V and 24V vehicles. Using another power supply is not possible (without cutting) due to the special connectors used to connect the power supply to the dashcam.
The dashcam stores images with date and time recording at the bottom of the videos. Later, it is therefore possible to see exactly when certain recordings were made.
Viewing the recorded images from the Motocam C4.3 4CH can be done via PC or on the dashcam itself. The dashcam comes with USB cable that allows the dashcam to be connected to the PC. The video files are stored as normal MP4 files on the SD card, these can be viewed with any video player on the PC.
The Motocam C4.3 4CH supports MicroSD cards of up to 32gb. This is good for a total of about 18 hours of VGA recording, so with four cameras, about 4 hours.
The English-language manual for the Motocam C4.3 4CH can be downloaded under the ‘Manual’ heading under the product specifications on this page.
| Image | |
|---|---|
 ChannelsThe number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
4CH
|
 ResolutionVideo resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
HD ready
|
 Night visionThe quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
 Viewing angleDashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
 Image sensorThe image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
 ProcessorThe chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
 WifiWifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
 GPSA dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
 Parking modeA dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
 CloudA dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
 Loop recordingLoop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
 G-sensorThe G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
 ADASAdvanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
 LCD displayAn LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
 LCD size |
|
 TouchscreenA dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
 Mount typeA dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Zuignap
|
 Plug typeThe type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
 CPL filter optionA CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
 Memory typeThe way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
 SD supportWith a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb
|
 MicrophoneA microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
 BatteryA dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
 PowerThe voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
 Weight |
1970 g
|
 Dimensions |
|
| General | |
 Brand |
Motocam
|
 Price |
€199,00
|
 Warranty |
|
 EAN barcode |
2112888679778
|
| Contents | |
 In the box |
|
 | |
|---|---|
| Image | |
| Channels The number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
4CH
|
| Resolution Video resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
HD ready
|
| Night vision The quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
| Viewing angle Dashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
| Image sensor The image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
| Processor The chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
| Wifi Wifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
| GPS A dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
| Parking mode A dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
| Cloud A dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
| Loop recording Loop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
| G-sensor The G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
| ADAS Advanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
| LCD display An LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
| LCD size |
|
| Touchscreen A dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
| Mount type A dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Zuignap
|
| Plug type The type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
| CPL filter option A CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
| Memory type The way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
| SD support With a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb
|
| Microphone A microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
| Battery A dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
| Power The voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
| Weight |
1970 g
|
| Dimensions |
|
| General | |
| Brand |
Motocam
|
| Price |
€199,00
|
| Contents | |
| In the box |
|
