The Motocam X10 4CH is the perfect combination of a truck camera system and dashcam with four 720p dashcams. The three front cameras can be placed around the cab and the rear camera with 15-metre cable can be mounted on the back of the trailer or truck. The remote control makes it easy to switch between the four cameras.
Camera and dashcam combo
This Motocam X10 4CH is a nice dashcam that can be used as a truck camera system at the same time. The large 10-inch TFT screen can show all cameras simultaneously or separately. The Motocam X10 4CH is therefore the ideal assistant while driving and makes it a lot more comfortable for the driver.
4x 720p cameras
The Motocam X10 4CH is equipped with four 720p cameras so that everything around the truck is recorded. The resolution of the cameras is sufficient to see and assess situations around the truck.
Cam 1 720p 110˚: 2m (front)
Cam 2 720p 110˚: 6m (left)
Cam 3 720p 110˚: 6m (right)
Cam 4 720p 110˚: 15m (rear)
Images from all cameras are stored separately on the Micro SD card regardless of which camera is displayed on the LCD screen.
Remote control
The Motocam X10 comes with handy remote control to operate the camera without having to reach the monitor.
Loop recording
As with any ‘standard’ dashcam, the Motocam X10 4CH truck dashcam has loop recording which automatically overwrites the oldest files for new files. That way, the dashcam always keeps on filming, even when the SD card is full. Depending on the size of the SD card, this preserves the last hours driven.
Auto start
The Motocam X10 4CH truck dashcam automatically starts filming when the car is started and it stops automatically when it is switched off. So you don't actually have to look at it after installation. The prerequisite for automatic start and stop is that the cigarette power supply only provides power when the ignition is turned on, as this allows the dashcam to notice when the ignition is turned on and off.
G-sensor
With its built-in G-sensor, the Motocam X10 4CH notices when you have had an accident. Upon impact, images are automatically stored securely so they are no longer lost. They can no longer be overwritten or deleted via the dashcam. This way, you can be sure that the most important files are always preserved. The sensitivity of the G-sensor can be adjusted in the menu.
Screensaver
The Motocam X10 4CH has a built-in screensaver. This screensaver automatically turns off the screen - by default after 1 minute - so that the driver is not unduly disturbed while driving. The screen can be reactivated with a single press of the Bluetooth or OK button. The screen saver can also be switched off in the menu, in which case the screen always remains on.
Built-in microphone
This Motocam X10 4CH dashcam has a built-in microphone. The videos are therefore provided with audio. The microphone can be switched on and off with a single press of the Menu button.
Self-adhesive mounting
Motocam X10 4CH comes with handy self-adhesive mounting for the LCD screen. This allows the screen to be securely mounted on the dashboard so it is clearly visible to the driver.
With 4m cigarette power supply
The Motocam X10 4CH comes with 4-metre 5V/3A cigarette power supply to power the dashcam. The power supply is suitable for 12V and 24V vehicles. Using another power supply is not possible (without cutting) due to the special connectors used to connect the power supply to the dashcam.
Date and time recording
The dashcam stores images with date and time recording at the bottom of the videos. Later, it is therefore possible to see exactly when certain recordings were made.
Viewing images
Viewing the recorded images from the Motocam X10 4CH can be done via PC or on the dashcam itself. The dashcam comes with USB cable that allows the dashcam to be connected to the PC. The video files are stored as normal MP4 files on the SD card, these can be viewed with any video player on the PC.
128gb support
The Motocam X10 4CH supports Micro SD cards up to 128gb. This is good for a total of around 24 hours of 720p recording.