Nanocam M93 Pro 5K Touch Wifi GPS 64gb dashcam

The Nanocam M93 Pro is the first 5K dashcam. With this very high-quality dashcam, you can record everything around your car in crystal-clear quality. The Nanocam M93 Pro is equipped with virtually every feature imaginable, such as a large 4.0-inch touchscreen LCD display, Wifi and GPS. With the comprehensive parking mode, you can also keep your car secure whilst parked, and thanks to support for 512GB Micro SD cards, you can store several days’ worth of video footage.

5K resolution

The Nanocam M93 Pro is the first dashcam with 5K resolution. This dashcam records videos in widescreen 5160p × 2160p. When you connect the rear camera, the resolution is adjusted to 4K + Full HD. You can also set the resolution to a lower level to store more data on the SD card.

Full HD rear camera

The rear camera films in Full HD at 30fps and connects easily to the front dashcam. It is connected via a 6-metre cable, and the videos are saved simultaneously to the SD card. When the rear camera is connected, the front camera’s resolution is automatically adjusted to 4K.

Night vision

Thanks to the high-quality 8.0MP image sensor, the footage is of the highest quality even at night. WDR (Wide Dynamic Range) technology ensures that the contrast and brightness of the images are optimally adjusted.

Includes a 64GB Micro SD card

The Nanocam M93 Pro 5K comes with a 64GB Micro SD card as standard, so you can start recording straight away. The dashcam also supports larger Micro SD cards up to 512GB. The included 64GB card can store approximately 4 hours of video in 4K + Full HD.

At lower Full HD+ and Full HD resolutions, and with a 512GB card, you can store up to 54 hours of video. Thanks to loop recording, the oldest footage is always automatically overwritten by new footage, ensuring the camera continues recording at all times.

4.0-inch touchscreen LCD

With the large and bright 4.0-inch touchscreen LCD, navigating the menu and viewing recordings is a piece of cake. The user-friendly menu is available in Dutch and is very intuitive. With the customisable screensaver, you can set the screen to switch off after a few minutes’ driving or to display your speed on-screen.

Wifi

The Nanocam M93 Pro is equipped with Wifi, making it super easy to view live and recorded footage via your smartphone. Via Wifi, you can log in to the dashcam and control it via your phone whilst within range of the dashcam (+/- 5 metres). This means you don’t have to remove the SD card from the camera to view footage. The Nanocam M93 Pro uses the KaCam App for iOS (Apple) and Android phones and tablets.

Built-in GPS

The M93 Pro 5K has a built-in GPS receiver. The GPS allows the speed to be displayed on screen and tracks the coordinates of the locations where footage was recorded. This means that, using the software supplied, you can later see exactly where specific recordings were made.

CPL filter option

To improve image quality and reduce reflections in the footage, you can upgrade the Nanocam M93 Pro with the optional universal CPL filter (see accessories). This filter acts as a sort of Polaroid sunglasses for the lens and can be useful in sunny conditions.

2 self-adhesive mounts

The dashcam comes with two self-adhesive mounts, ideal for using the dashcam in multiple cars. The sturdy mount ensures the dashcam stays securely in place and that the recordings are free from unnecessary vibrations. The mount is attached to the windscreen using a 3M sticker, and the dashcam clicks into place in the mount. The camera can be rotated in all directions to ensure it is positioned correctly.

Automatic parking mode

The M93 Pro 5K dashcam features a handy automatic parking mode with four options:

Time-lapse (1fps): The camera records continuously at 1fps in time-lapse mode, including with the rear camera if fitted. In this mode, the camera takes a photo every second, which is later played back as a time-lapse video. Time-lapse is an energy-efficient recording mode, meaning the dashcam does not consume too much power or data. As a result, up to 30 times more videos can be stored on the SD card.

Motion detection: The camera switches off when you switch off the car’s ignition and enters standby mode until a vibration is detected by the G-sensor. In that case, a standard 1-minute recording is started.

Vibration detection: The car camera switches off with the ignition; if a vibration is detected, the camera switches on and starts a short 1-minute recording.

Normal recording: The dashcam continues recording as normal when the car’s ignition is switched off.

* The M93 Pro 5K’s automatic parking mode only works in conjunction with the optionally available Nanocam NH03 hardwire kit and cannot be switched on or off manually. When used with the hardwire kit, the camera automatically switches to parking mode when the car’s ignition is switched off and resumes normal recording when you start the car again. Once installed, you won’t have to worry about it anymore.

Loop recording

With loop recording, all footage is saved in shorter 5-minute segments. As soon as the SD card is full, the oldest videos are automatically deleted and overwritten to make way for new recordings. This ensures that the most recent journeys are always stored on the SD card. When a recording is triggered, the current file is locked so that it cannot be overwritten.

150˚ wide-angle lens

This M93 Pro 5K features a 150˚ wide-angle lens at the front and a 150˚ wide-angle lens at the rear. This captures a very large area around the car.

Auto start

The Nanocam M93 Pro 5K dashcam starts recording automatically as soon as power is supplied. Simply connect it to the car charger and you won’t have to worry about it again. If your car provides a constant power supply via the cigarette lighter socket, it is wiser to use a hardwire kit to conserve the car’s battery.

G-sensor

Thanks to the built-in G-sensor, the dashcam detects collisions or severe vibrations. In the event of an impact, footage is automatically secured so that it cannot be lost. It cannot be overwritten or deleted via the dashcam.

Built-in microphone

The Nanocam M93 Pro 5K has a built-in microphone so that sound is also recorded. The microphone can be easily switched on and off at the touch of a button.

Date + Time watermark

The date and time can be displayed at the bottom of each video. This makes it easy to see later where and when the footage was recorded.

Handy dual USB cigarette lighter adapter

This M93 Pro dashcam comes with a handy dual USB cigarette lighter adapter and a separate 3.5-metre cable. This leaves you with an extra USB port for charging your phone.

Please note: When connecting to an existing USB port in the car, this USB port must supply at least 2.5A. If the output is lower, the dashcam will not work or will function poorly.