€152,47
This DDPai N5 Dual is DDPai's new high-end 4K + FullHD model. This high-quality and comprehensive dashcams is equipped with the latest gadgets such as eMMC + SD memory and an advanced parking mode.
The image quality on this DDPai N5 Dual is outstanding by using the high-quality 8.0MP image sensor. The cameras film at 4K on the front and FullHD on the rear.
The rear camera is connected to the front dashcam with a long supplied 6-metre cable. The cameras record simultaneously and the videos are stored separately on the SD card.
This DDPai N5 Dual is equipped with Wifi and can therefore be used with the DDPai app. The user-friendly app is convenient to operate and can be used to view live or saved footage and to change settings. Any firmware updates can also be conveniently performed via the app.
The DDPai N5 Dual has a convenient automatic parking mode that can be used to secure the car when it is parked. The parking mode is automatically activated when no movement is detected for 15 minutes. The parking mode works with Time Lapse, which means a picture is taken every second that can later be played back as accelerated video. The advantage of parking mode with Time Lapse is that the recordings consume much less data and power than normal recordings. Moreover, people and license plates are still shown recognisably.
Note: The (automatic) parking mode works only in combination with the optional DDPai Continuous power supply USB-C to power the dashcam when the ignition is switched off.
The DDPai N5 Dual is equipped with a super capacitor battery. This battery ensures that the camera can properly shut itself down after power is lost. Super capacitor batteries are specially developed for use in dashcams because they are more durable than regular Polymer Li-ion batteries and are also more resistant to high and low temperatures.
The ADAS system on this DDPai N5 Dual is a built-in ‘Advanced Driver Assistant System’. This system supports the driver while driving in three ways:
FCWS: ‘Forward Collision Warning System’. This system issues a warning when approaching a vehicle in front at high speed. The system alerts, for example, when there is a traffic jam in front of the car.
LDWS: ‘Lane Departure Warning System’. When the car is in danger of changing lanes on the motorway, the camera can signal.
FVSA: ‘Forward Vehicle Start Alarm’. Do you also sometimes fail to pay attention when standing at traffic lights? This system gives a warning when a vehicle ahead starts to move away, for example at a traffic light or in a traffic jam.
*The ADAS system works better in some locations than others depending on the type of (highway) road. On narrow roads, for example, the LDWS system can issue an alert faster than on wide roads.
The DDPai N5 Dual is equipped with WDR (Wide Dynamic Range) to improve image quality. Especially in conditions with very high or very low light, WDR ensures that image quality is still good.
This N5 Dual has a wide-angle lens of 140 degrees at the front and 125 degrees at the rear. This allows a very large area to be observed, not only in front of the car but also in the surrounding area. The aspect ratio of 16:10 also makes the viewing angle even wider than other dashcams with a ratio of, say, 3:4.
The advanced memory technology on this DDPai N5 Dual ensures that you don't miss anything and minimises the chance of storage errors. The dashcam has a backup 32gb eMMC internal memory that kicks in when the SD card can't be used for a while. Micro SD cards the N5 Dual supports up to 512gb, good for about 50 hours of videos.
The DDPai N5 Dual dashcam automatically starts filming when the car is started and stops filming when the car is turned off. So you don't have to look at it while it's hanging in the car.
With its built-in G-sensor, the dashcam notices when you've had an accident. Upon impact, images are automatically stored securely so they are not lost. They can no longer be overwritten or deleted via the dashcam.
In combination with the DDPai N5 Dual hardwire kit, the DDPai N5 Dual has the option to set a voltage at which the dashcam switches off when the car battery falls below this voltage. The voltage can be set to 12.4V, 12.0V and 11.8V.
The DDPai N5 Dual has a built-in microphone so that sound is also recorded. The microphone can also be switched off if required.
The current time and date are always displayed on screen so that it can later be shown at what time the relevant recordings were made.
Found the right dashcam?
Our product finder matches you with the dashcam that suits you and your car in just a few questions.
Install your dashcam yourself?
You can often install a dashcam yourself in around 1 to 1.5 hours. A standard cigarette-lighter installation usually requires no tools.
For the best performance from your dashcam
100Wh power bank for using parking mode without draining your car battery. Note: you need…
| Image | |
|---|---|
 ChannelsThe number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
2CH
|
 ResolutionVideo resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
Full HD, 2K, and 4K
|
 Night visionThe quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
 Viewing angleDashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
 Image sensorThe image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
 ProcessorThe chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
 WifiWifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
 GPSA dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
 Parking modeA dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
 Parking mode typesIn parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Time lapse
|
 CloudA dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
 Loop recordingLoop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
 G-sensorThe G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
 ADASAdvanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
 LCD displayAn LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
 TouchscreenA dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
 Mount typeA dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Adhesive
|
 Plug typeThe type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
 CPL filter optionA CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
 Memory typeThe way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
 SD supportWith a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
 MicrophoneA microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
 BatteryA dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
 PowerThe voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
 Weight |
120 g
|
 Dimensions |
|
| General | |
 Brand |
DDPai
|
 Price |
€152,47 |
 Warranty |
|
 EAN barcode |
6934915204120
|
| Contents | |
 In the box |
|
Active even while your car is parked
DDPai N5 Dual 2CH 4K Wifi GPS dashcam€152,47
€152,47
Order before 23:45 for same-day dispatch
Out of stock
 | |
|---|---|
| Image | |
| Channels The number of cameras or “channels” the dashcam uses to film. A 1-channel 1CH dashcam films only the front and a 2CH also has a rear camera. A 3CH has an additional interior camera and a 4CH dashcam often consists of four separate cameras.
|
2CH
|
| Resolution Video resolution indicates how many pixels the videos consist of. Therefore, the higher the resolution, the larger the videos are and the more details can be seen. For example, 4K refers to the number of horizontal pixels (3840) of the video.
|
Full HD, 2K, and 4K
|
| Night vision The quality of video at night or in low light conditions is mainly determined by the image sensor used in the dashcam. Some dashcams also have infrared LEDs, but these are mainly effective at short distances for interior cameras, for example.
|
|
| Viewing angle Dashcams always have a round “fish eye” lens with a wide viewing angle so that a larger area around the camera is recorded. So a wider viewing angle means you capture more but also results in some distortion at the sides.
|
|
| Image sensor The image sensor used determines the resolution of the videos and is the biggest determinant of dashcam image quality.
|
|
| Processor The chip or processor is basically the computer or brain of the dashcam. It converts the images into digital video files (usually MP4 or AVI). Along with the image sensor, it is a major determinant of the quality of the final videos.
|
|
| Functions | |
| Wifi Wifi allows you to view images on your phone or tablet within range of the camera (5 to 10 meters) without having to remove the SD card from the dashcam.
|
|
| GPS A dashcam with GPS records the current speed and location while filming. The speed can be displayed at the bottom of each video, this can be useful in determining the question of fault in an accident.
|
|
| Parking mode A dashcam with parking mode secures your car when it is parked. To use parking mode, the dashcam must be connected with a permanent power cable at the car's fuse box or to a Powerbank (see accessories).
|
|
| Parking mode types In parking mode, a dashcam films in a way that consumes less data and power such as in Time lapse (1 picture per second), motion detection or vibration detection. The dashcam automatically switches to this mode when you turn off the car's ignition.
|
Time lapse
|
| Cloud A dashcam with Cloud allows you to watch live and receive notifications of (parking) events anywhere in the world. To use Cloud, you need a SIM card with internet connection and sometimes a (paid) user account.
|
|
| Loop recording Loop recording allows the dashcam to keep recording continuously with a full SD card. When the SD card is full it automatically overwrites the oldest videos so that always the last trips are stored on the SD card.
|
|
| G-sensor The G-sensor in a dashcam records vibrations and therefore notices when a collision or incident occurs. In that case, the current recording is stored separately and securely so that it cannot be overwritten by the Loop recording.
|
|
| ADAS Advanced Driver Assistant System that can warn of dangerous situations such as a rapidly approaching predecessor or undetected lane changes. Be aware that this system is never 100% reliable and due to limited input is not always effective.
|
|
| Device | |
| LCD display An LCD screen makes it easy to adjust the dashcam, operate the menu and view live and saved videos. With most dashcams, the LCD screen turns off after a few minutes of driving so it is not distracting to the driver.
|
|
| Touchscreen A dashcam with touchscreen LCD screen you operate by using your fingers on the screen like on your smartphone. A dashcam without a touchscreen is operated with buttons.
|
|
| Mount type A dashcam is mounted on the windshield with a suction cup or adhesive mount. Suction cup mounts are easier to remove but slightly less durable, while adhesive mounts are sturdier and more durable but more difficult to remove.
|
Adhesive
|
| Plug type The type of plug used to power the dashcam. Can be useful if you want to switch to another model of dashcam without having to reinstall the entire power supply.
|
|
| CPL filter option A CPL filter acts like Polaroid sunglasses in front of the lens and can prevent harmful or annoying reflections. Keep in mind that it is better to remove the CPL filter at night because otherwise the videos may become too dark.
|
|
| Memory type The way videos are stored in the dashcam. Most dashcams use a Micro SD card, others have built-in eMMC memory. Preferably use a new and fast SD card from a well-known brand to avoid failures.
|
|
| SD support With a Micro SD card, the storage capacity - depending on the dashcam model - can be expanded to 128gb, 256gb or even 512gb. Up to about 24 hours of FullHD or 12 hours of 4K video can be stored on a 128gb SD card.
|
32gb, 64gb, 128gb, 256gb, and 512gb
|
| Microphone A microphone also records sound with the videos. Most dash cams allow you to turn off the microphone with the push of a button.
|
|
| Battery A dashcam is equipped with a Li-ion battery or capacitor (Super capacitor). The batteries are very small and only intended to be able to turn off the dashcam if the power fails. Therefore, a dashcam must always be connected to the power supply.
|
|
| Power The voltage at which the dashcam can be used. Most dashcams are compatible with all cars and trucks with 12V and 24V. Always use the original included power supply or optional hardwire kit.
|
12V and 24V
|
| Weight |
120 g
|
| Dimensions |
|
| General | |
| Brand |
DDPai
|
| Price |
€152,47 |
| Contents | |
| In the box |
|
