The Vantrue Nexus 4 Pro (N4 Pro) is one of Vantrue's latest top-of-the-range dashcams. This comprehensive high-end dashcam is packed with features and films with as many as 3 cameras. With true 4K resolution on the front due to the Sony Starvis 2 image sensor, the images are of the best quality. You also secure your car with this N4 Pro by connecting it with the optional hardwire kit.

4K + 2x FullHD with WDR

This Vantrue N4 Pro records in sharp 4K (3840p*2160p) at 25fps on the front camera. Thanks to WDR (Wide Dynamic Range), the recordings have very good contrast and the surroundings are recognizable even in the dark. With the rear camera connected, the resolution is adjusted to 2K + FullHD + FullHD.

The interior camera and rear camera both film in FullHD 1080p. The interior camera is integrated into the front dashcam, so no extra connection is needed. The interior camera also has infrared LEDs so that visibility in the dark is of exceptionally good quality.

The rear camera is connected to the front dashcam with a long 6-metre cable. Videos from both cameras are stored separately on the SD card. On the LCD screen, the image can be switched between the front and rear camera or both at the same time.

3.19-inch LCD screen

The Vantrue N4 Pro is equipped with a large and bright 3.19-inch widescreen LCD screen on which the recordings are visible and you can easily operate the menu. The screen has a screensaver that activates after 1 minute so it doesn't bother you while driving. You can also turn the screen on and off with the voice command ‘Turn on screen’ and ‘Turn off screen’.

Wireless 5.0gHz Wifi

Within range of the dashcam (+/- 5 metres), you can easily view the recorded videos on your smartphone via the Vantrue App for iOS or Android. The videos can be viewed live and you can download saved videos to your phone so you can share them instantly. Thanks to the 5.0gHz Wifi, file transfer is faster than with many other dashcams. The menu is also easy to operate via the app to change settings very quickly.

GPS

The Vantrue N4 Pro is equipped with GPS so that current speed and coordinates are tracked. The speed can be displayed at the bottom of each video if desired, and the film location and route can be viewed later via the App.

Voice control

The Vantrue N4 Pro allows you to control the dashcam via (English) voice commands. Commands such as ‘Make picture’, ‘Turn off screen’, ‘Turn on audio’ and ‘Lock the video’ allow you to use the dashcam safely while driving and not miss a single incident.

Automatic buffered parking mode

Vantrue offers the ability to secure your car while parking. Connect your Vantrue dashcam with the OBD or 3-wire hardwire kit to power the dashcam even when the car is switched off. The power supply transmits a signal to the dashcam as soon as you turn off the car so that parking mode is automatically enabled.

Parking mode works only in combination with the OBD or 3-wire hardwire kit. In this power supply there is a safety device that cuts the power at a certain voltage so you don't end up with a dead battery.

Vantrue has four recording modes during parking:

Motion detection: Motion detection (with adjustable sensitivity) where the dashcam is on standby until a visual movement is detected in the image. After this, it records 5 seconds before and 30 seconds after the incident.

Collision detection: Vibration detection (with adjustable sensitivity) where the dashcam switches off until a vibration is detected. It then turns on, records for 1 minute and turns off.

Low bitrate recording: Continuous recording in lower quality (720p or 1080p in 15fps) to save space on the SD card. As soon as a vibration is detected, normal 1-minute recording is started.

Time lapse recording: Continuous recording in 1fps, 5fps, 10fps or 15fps to save space on the SD card. At 1fps, a 30-minute period is played back in 1 minute. As soon as a vibration is detected, a normal 1-minute recording is started.

360-degree view

As the Vantrue N4 Pro is equipped with 3 cameras, everything in and around the car is recorded. Together, the front camera (155˚), interior camera (160˚) and rear camera (165˚) ensure you don't miss a thing.

Optional CPL filter

Attach the optional CPL (Polaroid) filter to your Vantrue dashcam to counteract annoying reflections from the dashboard or interior. The filter attaches to the dashcam in no time and is easily adjusted by turning it.

Optional Bluetooth SOS button

The Vantrue N4 Pro can be expanded with a handy Bluetooth SOS button. You place this button anywhere in the car and with one push of the button, you can take photo and secure video or turn the dashcam's microphone on and off.

G-sensor

The Vantrue N4 Pro has a built-in G-sensor. This sensor records vibrations in case of a collision. The current video is stored securely in that case.

Loop recording

The Vantrue N4 Pro is equipped with loop recording, which automatically overwrites the oldest images with new ones. Videos are stored in shorter fragments of 5 minutes and once the SD card is full, the oldest fragment is deleted.

Secure recordings (manually selected or detected by the G-sensor) are stored in a separate folder and are not deleted by loop recording. This way, you always have access to the latest and most important videos.

512gb support

Vantrue is one of the few dashcam brands with support for SD cards up to 512gb. With 512gb, you can store up to 108 hours (over 4 days) of FullHD videos. With higher resolution, the total recording time will be a bit shorter.